Are you one of them?

Join thousands of professionals, that use Controlling Machines and Processes in their work day.

What is Controlling Machines and Processes?

Using either control mechanisms or direct physical activity to operate machines or processes (not including computers or vehicles).

Occupations that perform the activity Controlling Machines and Processes

Pile-Driver Operators

Operate pile drivers mounted on skids, barges, crawler treads, or locomotive cranes to drive pilings for retaining walls, bulkheads, and foundations of structures, such as buildings, bridges, and piers.

Tire Builders

Operate machines to build tires.
Work Category: Manufacturing

Roof Bolters, Mining

Operate machinery to install roof support bolts in underground mine.

Mine Shuttle Car Operators

Operate diesel or electric-powered shuttle car in underground mine to transport materials from working face to mine cars or conveyor.

Manufactured Building and Mobile Home Installers

Move or install mobile homes or prefabricated buildings.

Continuous Mining Machine Operators

Operate self-propelled mining machines that rip coal, metal and nonmetal ores, rock, stone, or sand from the mine face and load it onto conveyors or into shuttle cars in a continuous operation.

Rolling Machine Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend machines to roll steel or plastic forming bends, beads, knurls, rolls, or plate or to flatten, temper, or reduce gauge of material.
Work Category: Manufacturing

Chemical Equipment Operators and Tenders

Operate or tend equipment to control chemical changes or reactions in the processing of industrial or consumer products. Equipment used includes devulcanizers, steam-jacketed kettles, and reactor vessels.
Work Category: Manufacturing

Paving, Surfacing, and Tamping Equipment Operators

Operate equipment used for applying concrete, asphalt, or other materials to road beds, parking lots, or airport runways and taxiways, or equipment used for tamping gravel, dirt, or other materials. Includes concrete and asphalt p…

Mine Cutting and Channeling Machine Operators

Operate machinery such as longwall shears, plows, and cutting machines to cut or channel along the face or seams of coal mines, stone quarries, or other mining surfaces to facilitate blasting, separating, or removing minerals or m…

Grinding, Lapping, Polishing, and Buffing Machine Tool Setters, Operators, and Tenders, Metal and Plastic

Set up, operate, or tend grinding and related tools that remove excess material or burrs from surfaces, sharpen edges or corners, or buff, hone, or polish metal or plastic work pieces.
Work Category: Manufacturing

Nuclear Power Reactor Operators

Operate or control nuclear reactors. Move control rods, start and stop equipment, monitor and adjust controls, and record data in logs. Implement emergency procedures when needed. May respond to abnormalities, determine cause, and…
Work Category: Manufacturing

Power Plant Operators

Control, operate, or maintain machinery to generate electric power. Includes auxiliary equipment operators.
Work Category: Manufacturing

Cutting and Slicing Machine Setters, Operators, and Tenders

Set up, operate, or tend machines that cut or slice materials, such as glass, stone, cork, rubber, tobacco, food, paper, or insulating material.
Work Category: Manufacturing

Structural Iron and Steel Workers

Raise, place, and unite iron or steel girders, columns, and other structural members to form completed structures or structural frameworks. May erect metal storage tanks and assemble prefabricated metal buildings.

Furnace, Kiln, Oven, Drier, and Kettle Operators and Tenders

Operate or tend heating equipment other than basic metal, plastic, or food processing equipment. Includes activities, such as annealing glass, drying lumber, curing rubber, removing moisture from materials, or boiling soap.
Work Category: Manufacturing

Cooling and Freezing Equipment Operators and Tenders

Operate or tend equipment, such as cooling and freezing units, refrigerators, batch freezers, and freezing tunnels, to cool or freeze products, food, blood plasma, and chemicals.
Work Category: Manufacturing

Tree Trimmers and Pruners

Using sophisticated climbing and rigging techniques, cut away dead or excess branches from trees or shrubs to maintain right-of-way for roads, sidewalks, or utilities, or to improve appearance, health, and value of tree. Prune or …

Boilermakers

Construct, assemble, maintain, and repair stationary steam boilers and boiler house auxiliaries. Align structures or plate sections to assemble boiler frame tanks or vats, following blueprints. Work involves use of hand and power …
Work Category: Manufacturing

Airline Pilots, Copilots, and Flight Engineers

Pilot and navigate the flight of fixed-wing, multi-engine aircraft, usually on scheduled air carrier routes, for the transport of passengers and cargo. Requires Federal Air Transport Pilot certificate and rating for specific aircr…
O*NET in-it